top of page

These sets consist of high temperature/heat resistant, silicone gray dust boots and pressure seals, manufactured by Frenkit Performance for most late-model Brembo calipers. These are the perfect components for street and track-oriented performance vehicles!

 

These are silicon dust boots and high temperature pressure seals and are recommended for track/racing/high performance driving events.

 

Included are the following components:

  • 30mm High Temp Gray Silicone Dust Boot, Quantity 2
  • 30mm Pressure Seal, Quantity 2
  • 32mm High Temp Gray Silicone Dust Boot, Quantity 2
  • 32mm Pressure Seal, Quantity 2
  • 34mm High Temp Gray Silicone Dust Boot, Quantity 2
  • 34mm Pressure Seal, Quantity 2
  • Caliper Temperature Sticker - Included Free
 
This is also an OE replacement for StopTech Rebuild Kit part number:
  • 143.99030K - 30mm
  • 143.99032K - 32mm
  • 143.99034K - 34mm
This seal kit replaces OE Brembo Dust Boot part numbers:
  • 20.4872.41 (20 4872 41) - 30mm
  • 20.4872.42 (20 4872 42) - 32mm
  • 20.4872.43 (20 4872 43) - 34mm
This seal kit replaces OE Brembo Pressure Seal part numbers:
  • 05.5955.53 (05 5955 53) - 30mm
  • 05.5955.54 (05 5955 54) - 32mm
  • 05.5955.55 (05 5955 55) - 34mm
This seal kit replaces OE Brembo Rebuild Kit part numbers:
  • 105.5955.53 (105 5955 53) - 30mm
  • 105.5955.54 (105 5955 54) - 32mm
  • 105.5955.55 (105 5955 55) - 34mm

 

Typically on a 6-Piston caliper, there are two of each piston size, so this combination should service one front caliper (6 pistons total).  These are not application specific, rather for those who may have a single torn dust boot or failed pressure seal or for those who are rebuilding their calipers; however, this kit will may work for many aftermarket Brembo or StopTech 6-piston caliper combinations.  Common applicatications are on the Porsche 991.1/2, 992 Carrera S, along with 718 GTS 4.0.

30mm/32mm/34mm Brembo Caliper Rebuild Kit - 991.1/2 S

SKU: 663005
$70.00Price
  • Condition: New Brand:

    Frenkit

    Pressure Seal Part Number: 753.99001 + 753.24411 + 753.24471 Material: High Temperature/Heat resistant gray silicone
    Dust Boot Part Number: 750.99001 + 750.99012 + 750.99002 Manufacturer Part Number:

    143.99030K + 143.99032K + 143.99034K

    Brembo Replacement Dust Boot Part Number: 20.4872.41 + 20.4872.42 + 20.4872.43 Interchange Part Number: 143.99030K 143.99032K + 143.99034K
    Brembo Replacement Pressure Seal Part #: 05.5955.53 + 05.5955.54 + 05.5955.55 Placement on Vehicle: Left, Right, Front
    Seal Diameter: 30mm + 32mm + 34mm Warranty: No Warranty
    Quantity Pressure Seals: 6 Country/Region of Manufacture: Spain
    Quantity Dust Boots: 6 Other Part Number: 20.4872.41 + 20.4872.42 + 20.4872.43
    UPC:

    Does not apply

Product Page: Stores_Product_Widget
bottom of page